Vacuum cleaner daily maintenance methods

Worry about the dust at home is always so much, then the housewives will seriously choose a relatively good home vacuum cleaner, but the use of vacuum cleaner, although greatly facilitate our lives, but after the use of vacuum cleaners also need to spend time to maintain maintenance, Or will not only affect the use of vacuum cleaner effect, but also lead to reduce the life of the vacuum cleaner, today I sort out some of the vacuum cleaner on the use and maintenance of a simple method, only for your reference.

1. Before using the vacuum cleaner, check the cleaning bag (dust bag should be noted that there is no damage), dust box or barrel is clean, there is a foreign matter or full should be drained and then use.

2. Before use, please check the power cord and the plug is not damaged, after the end of the use of the power coil around a hanging hanging on the head of the hook on the cover.

3. The use of the process should pay attention to continuous use should not be too long, as much as possible within 2 hours. So as to avoid overheating of the motor, affecting the life of the vacuum cleaner.

4. If the process of using dust close to the full file or found a foreign body plug the straw, should immediately shut down, clean and then use.

5. Use a vacuum cleaner as far as possible away from the pump or strong radiation source, because any electrical itself will have a certain radiation.

6. Vacuum cleaner brush should always check to check the brush wear, if serious wear and tear, it should be replaced.

7. After the end of the use of dust in the bag to remove the dirt in time, the brush on the hair and shredded clean, with a water or neutral detergent wet cloth wipe, and then dry in the sun naturally.

8. Long-term use will cause the filter mesh plug and lead to decreased suction. So should be regularly washed with water filters and bags, washed and then placed in a cool place to dry and then use, you can restore the suction.

9. Regularly check the vacuum tightening parts of the vacuum cleaner, vacuum cleaner motor bearings should be added to the lubricating oil to reduce the degree of wear on the motor, can effectively improve the motor life.

10. Hoses can not be discounted frequently, and do not over-stretch and bend. Vacuum cleaner inside the vacuum pad if the aging, loss of flexibility, should be replaced with a new pad.

11. Vacuum cleaner placed in place, try not to put the vacuum cleaner or corrosive gas in the place, choose a place where ventilation and dry, so as not to cause damage to the body.